If youre attempting to transform the look of your kitchen by introducing a wooden worktop, you will find the right idea. Stylish deco does not have to cost much and there are two major saving possibilities to be made. The first is purchasing the worktop on the internet and the 2nd which is of course installing the worktop yourself.
Wooden Worktops Basic DIY Installation Technique:
1. Prepare The various tools - Most tools needed ought to be available in your tool collection, otherwise consider borrowing the other tools to accomplish the task. The tools necessary for cellular phone are power saw, hand saw, jig saw, pencil, clamps, worktop bolts and brackets, drill kit, tape measure and quality sealant. There could be other tools required based on your precise circumstances, but most of those should be in resource anyway.
2. Prepare The Working Environment - Clear the room associated with an obstacles which might interfere with the work. The idea would be to concentrate on installing the worktop, not on moving electrical appliances and dishes around.
3. Measure The Surface - If youre replacing an existing worktop and it is current location and size are acceptable, simply copy the measurements from the old worktop towards the new worktop. If that is not the case, measure the surface and make certain to put extra attention to angles and curves. Once you are pleased with the measurement, mark it using a pencil. You could also get a template that is widely available nowadays from the wooden worktop supplier.
4. Saw The Worktop - Using whether power or hand saw put the worktop face-down to prevent chipping from the wood and saw by following your marking. Take special care when using a power saw and dont rush this stage from the installation.
5. Make Room For that Sink, Tap and Pipework - Once you have decided where each of them will go, put the worktop inverted and cut into the worktop. To make the cut in the wood the proper way, use a 10mm diameter drill bit to make a hole in each corner then use a jig saw to chop together resulting in a nicely round hole. Now seal the wood round the cut to prevent moisture (sink and tap) and to result in the surface heat resistant if installing a hob.
6. Joining The Worktop - Using the direction of cutter rotation into account, if you want to join several planks together use aluminium jointing strips with a silicone sealant. Much like step four, take special care when joining the wood together and dont rush it.
7. Fix The Worktop - Place the worktop in the correct position along with the kitchen units to check that its straight and level. Now use a countersunk chipboard screws with the front rails of the units into the underside from the wooden worktop and metal L brackets in the rear.
![[Valid RSS feed]](http://www.thearticlebeach2.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
